R - 960, has already well known all round the world, he was used in many power plant project, has unique 2 faces, normal and the inverted one, can be done even in the higher thickness until 1 mm. Any variation color material can be formed, width 960 mm
Kliplok 660 672
R – KLIP 672 & R KLIP 660 , The bolt-less roof, the way to stamp the hanger called fixing with wafer head screw and squeezing the insulation, min thickness 0,45 & 0,5 mm. With variation color in Colorbond, Kirana, Rainbow, bare, rib high 40 mm, width 672 mm. Note : no screw on the rib, avoiding the water leakage, can be applied on the swallow roof pitch (1˚), difficult to overlap, used roll on site is the option for length more than 15 m, not suitable for the thick insulation, not suitable for the strong windy area.
R 680 are very commonly and widely used, suitable for the architecture façade building with many rib (25 mm) with width effectively 680 mm, variation thickness in mm : 0.3; 0.35; 0.4; 0.45; 0.5, and in color Colorbond, Pelangi, Kirana, Zacs, advice : mostly used in the thicker sheet such as : 0.45 or 0.5 mm, width : 680 & 925 mm
R 1000, This type of the roof, also known as Single Rib, which has high rib = 38 mm, Market like this type because of his effective width 1000 mm, so no need any trimming, can be done in roll on site system. With the length more than 14 m, thickness in mm : 0.3; 0.35; 0.4; 0.45; 0.5, and in color Colorbond, Pelangi, Kirana, Zacs , widely used in the thinner sheet (below 0.4 mm) and bare.
R 930 PE lamination roof, is a insulation POLYETHYLENE, with 8 mm thickness, laminated under the roof sheet metal. to avoid any roof mesh + aluminum foil, this is the right choice. To accommodate the need of heat reduction, sound reduction, and interior expose also can be achieved, available in 0,35; 0,4; 0,45 mm, width 1000 mm, FLAT underneath.
R 890 has similarity with R BR6, only the width effective is 890 mm, it has 6 ribs, quite often used in aluminum material. With the high rib 38 mm.
R 750, can be formed in the straight roof or curve roof, with the width effective 750 mm, and has strong structure even without the support underneath, can be curved in variant radius, or joined overlap , and with or without footing. Mostly in 0,45 mm color.
R-600, with width effective 600mm, variation thickness in mm : 0.45; 0.50, and in color colorbond, kirana. Mostly used in the thicker sheet such as : 0.45 or 0.50mm. With the high rib 90mm and has 3 waves. Base material Steel Hi Ten G 550. This profile have layers of protection Zinc Alumunium, Prepainted Zinc Alumunium 150gr/m2 and Prepainted Zinc Alumunium 100gr/m2. Profile needs fixing.
R Standing Seam 300
R Standing Seam 300, is a snap together standing seam roof system with 50mm use on roofs with a minimum slope of 3:12. Standing seam panels are available in 300mm width. Standing seam panels can be installed over open framing or a solid substructure and are capable of transitioning from roof to fascia with the use of a rib cover. Standing seam does not require a solid substructure for support.
Double Skin System
The double skin façade is a system of building consisting of two skins or façade. In double skin insulation system a layer of insulation is provided between two metal sheets separated by Z sub girt spacers which are then together fixed to main structures original purlin and or the girts. Insulation material option is glasswool, rockwool, mineral wool and closed cell cross linked polyethylene. Benefit from double skin system is high load bearing capacity, excellent thermal insulation, energy saving, resistance to weather and aggresive environments, ease of installation, long life and very low maintenance cost, easy repair and replacement, acoustic sound insulation, reasonable fire reaction and resistance. The double skin roofing system is a high performance system comprising of an aesthetically designed trapezoidal or standing seam profile metal sheet on the top and a metal trapezoidal tray at the bottom. Coupled with wool insulation, it boost the performance of the system with improved level of thermal efficiency, acoustic and fire performance as compared to other roofing or walling system. A semi rigid slab product, is a versatile insulation that is available in various sizes to provide ease of installation and a perfect fit between purlins.
Double Skin Roof
One example of double skin roof installation in Steam Turbin Gas building PLTU Babelan, Bekasi.
Double Skin Wall
One example of double skin wall installation in Steam Turbin Gas building PLTU Babelan, Bekasi.
Curve 680 & 750, with width effective 680 and 750, variation thickness in mm : 0.45 ; 0.50 and radius minimum 500mm. With the high rib 25mm. This profile have layers of protection Zinc Alumunium, Prepainted Zinc Alumunium 150gr/m2. Profile widely used as sport hall, school, conveyor, commercial building, etc
Project Tarjun used profile curve roof
Sandwich Panel Roof
Sandwich Panel Roof comes as the best solution for all your roofing needs. Made from polystyrene, sandwich panel roof is very suitable to coat the roof as well as cover the top of your building with a sturdy looking best. Available in a wide range of colors. The key system between simple connections is so easy to install in all conditions.
R - SP , Sandwich roof, is a very good sound absorption and most of all is a very good temperature maintenance material. They are very suitable for the cool room or hypermarket, mall, food industrial, The material only available in 0,45 mm galvalume, in color blue or bare , width 1000 mm
R SP – WALL, can be built for portable camp, wall / partition for and as ceiling, very strong in tensile strength, and also compression stress, or known as load bearing wall, which can assume carrying weight of dead load (roof) and live load (human). Wall panel is available for the portacamp in 0.45 mm, with ivory color, and 0.5 – 0.6 mm for the clean room, white color
Sandwich Panel EPS
EPS (Expanded Polystyrene) Sandwich Panel is an adiabatic panel. In the manufacturing process, we use super quality polystyrene procured from well known vendors. These panels are highly resistant to extreme temperatures, water and sound. EPS Polystyrene sandwich panels are made available in various sizes and have a high load bearing capacity and involved minimal maintenance. It is widely used as the wall or roof for cold storage, industrial workshops, prefabricated houses, moveable housing and other public buildings.
Sandwich Panel Glasswool
Glass Wool Sandwich Panel is nonflammable and has better insulating performance, it will have been used as one of the building facing materials. Glass wool is one of insulating materials which are made by melting silica, feldspar, limestone and so on at 1500 to 1600 fiberizing them through centrifugal rotary process which has been known as a most recent engineering method. As its noncombustibility, insulation and tensile strength are improved much more, Glass Wool has much thinner and softer fiber than the existent thermal insulating glass materials and guarantee the semi-peromanent service life for superior water-repellent and durability. Sandwich Panel Glasswool have a features perfect incombustibility, high endurance degree, perfect thermal resistance, stable & harmless product, and excellent sound-absorption efficiency.
Sandwich Panel PIR
PIR (Polyisocyanurate) Sandwich Panel is composite sandwich panels comprising of PIR as the core material. These panels are an ideal solution for projects that require high energy efficiency and fire resistance for all external and internal partitioning. Polyisocyanurate is a conceptually new material which differ from foam polyurethane in its incombustibility. It offers a high degree of fire resistance, low thermal conductivity, an low specific gravity. Due to lower weight, PIR sandwich panels, considerably reduce the load on basement, which results in the minimum costs of foundation works and lower steel intensityof the building frames. These panels have gained increased popularity in the construction of refrigerating terminals, vegetables stores and logisticsand retail centres.
Sandwich Panel PU
We offering a wide range of PU (Polyurethane) Sandwich Panel to our most valued clients. Our range of PU Sandwich Panel is widely appreciated by our clients and affordable prices. PU (Polyurethane) have a features excellent adhesion, lower thermal conductivity, good compressive strength & dimensional stability, wide range of thickness and length as per customer requirements.
Sandwich Panel Rockwool
Rock wool sandwich panels is made from raw materials. Rock wool sandwich full play to the unique properties of rock wool core material in fire protection, thermal insulation, acoustic insulation, and so has a significant effect. Widely used in steel plants, simple activities room roof, wall, ceiling and air clean room partition. Sandwich panel and its production process to achieve in the factory automation equipment through the rock wool and steel complex as a whole, thus changing the previous scene composite rock wool plate required manner, to meet the thermal insulation of buildings under the premise of sound insulation, fire protection and other requirements, but reached a high quality, efficient, reliable, safe target.
F - D 1000, with the width 1000mm, has embossed standard, profile, can produced max 12m, galvanized Z 22 - 27 with the thickness 0.75 mm, 1mm, and 1,2mm (for heavu load).
R 1000, also known as Single Rib, which has high rib = 38 mm and width effective 1000mm. This type the roof and walls of stainless and resistant chemicals with special fibreglass basic materials and mixtures of alumina which is resistant to ultraviolet and is fire retardant, produced by pultrusion using CNC Continuous Laminating Machine
Available in multicolor.
Available in blue color, suitable for sandwich panel roof.
Available in white / ivory, for sandwich panel wall.
Available in white for R 1000 - R 960.
Rivet is a permanent mechanical fastener. Before being installed, a rivet consists of a smooth cylindrical shaft with a head on the end. The end opposite to the head is called the tail. On installation the rivet is placed in a punched or drilled hole.
Screw Electroplating Roofing
Standard Screw Electroplating
Screw For Wooden Purlin
Standard Screw For Wooden Purlin
Screw Galvanize 2,5 cm
Standard Screw Galvanize
Screw Wafer Head
Wafer head screws are a form of self drilling screw, which means they are specifically designed with drill bit points that bite into the metal. This eliminates the time and effort involved with drilling an additional pilot hole. Self drilling screws have become an increasingly popular choice for a wide range of roofing, sheet metal and wood materials. In particular, self drilling screws are often used to strengthen sheet metal, as well as for wood to wood fastening applications.
Self Drill Screw SUS 410 Stainless Steel 7,5 cm
Standard Self Drill Screw
Alumunium Foil consists of 3 products : Single Side, Double Side, and Double Side Fire Resistant
Glasswool consists of 1625; 1650; 2425; 2450; 3225; 3250; 4825; 4850
Roofmesh consists of 3315
Rockwool consists of 6050 and 8050